User's Manual

6.0 Electrical Specifications
T=25, VCC = 3.0V, Fo =2450MHZ, if nothing else stated.
Parameter Min Typ. Max Unit Condition / Note
Operating
frequency
2400 2450 MHz Programmable in 5MHz steps, 5 MHz
steps for IEEE 802.15.4 compliance
Number of
channels
16 For IEEE 802.15.4 compliance
Channel spacing 5 MHz For IEEE 802.15.4 compliance
Input/output
impedance
50 Ohm
Data rate 250 kbit/s
DSSS chip rate 2 Mc/s
Frequency
stability
+/-40 ppm
Transmit power -32 5 dBm Programmable from firmware
Parameter Min Typ. Max Unit Condition / Note
Harmonic:
2nd harmonic TBD
3rd harmonic TBD dBm
Spurious emission: Complies with EN 300 328, EN 300
440, FCC CRF47 Part 15 and ARIB
STD-T66
TX 30 1000 MHz
1-12.75 GHz TBD dBm
1.8-1.9 GHz TBD
5.15-5.3 GHz TBD
Sensitivity -98 dBm PER = 1% PER, 20byte packet
defined by IEEE 802.15.4 Boost
mode
Adjacent channel
rejection +/-5 MHz
35/35 dB IEEE 802.15.4 compliance at -82
dBm
Adjacent channel
rejection +/-10 MHz
40/40 dB IEEE 802.15.4 compliance at -82
dBm
Co-channel rejection -6
dB
Spurious emission,
RX 30 -1000 MHz
-57 dBm Complies with EN 300 328, EN 300
440, FCC CRF47 Part 15 and ARIB
STD-T66
1-12.75 GHz -47
Supply voltage 2.1 3.6 V
Current consumption,
RX
36 mA Max RX sensitivity (boost mode)
Current consumption,
TX
36 mA At max. TX power (+ 5dBm boost)
Quiescent current 1.0 μA including internal RC oscillator
Flash Memory 1 Kbit