User's Manual

3
PRODUCT OVERVIEW
The Computime In-Home Display unit shows your current usage rate, a history of your energy usage and a
forecast of your energy usage based on the data it collects. The smart ZigBee™ technology enables the unit
to communicate with your utility company so you can receive messages specific to your utility and your
selected consumer program.
SAFETY INSTRUCTIONS
Purpose and correct use:
• Read these instructions carefully and keep in a safe place for future reference.
• All manual/safety instructions and electricity supplier’s regulations must be adhered to.
• Only connect this unit to a UL/ETL approved 5-volt DC power supply provided by manufacturer.
• Do not install this unit at an altitude of over 2000 meters (6560 ft).
• This stand alone electronic unit should only be used in dry, closed living and office spaces. Do not
place the unit in a bathroom or area of excessive moisture. Do not allow the unit to get wet.
• Place the unit in an easy-to-reach position where you can comfortably reach the buttons and view the
screen.
• Do not expose the unit to temperatures below 5°C (41°F) or above 40°C (104°F), humidity above 90%
or pollution above level 2.
• Do not expose the unit to voltage beyond 90V-260V AC.
• Clean the unit with a dry, soft cloth. Do not use solvents or aggressive cleaning agents.
The manufacturer accepts no responsibility for damage caused by non-observance of these instructions.