User's Manual

Ju
ly
5
,
201
2
Page
46
of
49
66 8003 002
-
7
Enabling EMI events
There are two ways to enable that EMI events are sent from the lock:
• by presenting an Enable EMI events card at the lock; see section Enabling EMI events via card.
• by enabling EMI events from Lock Service; see section Enabling EMI events via Lock Service.
For more details about using Lock Service, see Quick reference guide Service PC.
Note: Both ways require that the Online option has been set in VISIONLINE.
See Setup manual VingCard VISIONLINE for information on how to set an option.
Enabling EMI events via card
1. Go to Start/Programs/
VisiOnline/VisiOnline
and log on.
2. Double click on ZigBee
configuration under
the Cards tab in the
navigation window.
3. At Card holder , click the
4. In the Users <ZigBee
configuration card> dialog,
mark the applicable user
and click Select .
5. The Card holder and also the User
group will appear in the ZigBee
configuration card dialog.
6. Enter the No. of days ; the
Expiration time will
automatically fill in.
7. At Type , choose ‘Enable EMI
events’ in the drop-down-menu.
8. If applicable, tick the checkbox
Print receipt .
9. Click Make card .
10. Present a card at the encoder.
11. Present the Enable EMI events
card at the lock.
button.