User's Manual

Ju
ly
5
,
201
2
Page
42
of
49
66 8003 002
-
7
14. Click the plus sign in front of the
thermostat; the motion sensor will
appear in the network tree.
15. Right click on the thermostat to
make sure that is still says ‘yes’
at ‘Join permitted’.
16. Issue a Discovery card in VISIONLINE:
- Go to Start/Programs/VisiOnline/
VisiOnline and log on.
- Double click on ZigBee configuration
under the Cards tab in the
navigation window.
- Browse to choose a Card holder and
enter the applicable No. of days .
- At Type , choose ‘Start discovery
in ZigBee’.
- If applicable, tick the checkbox
‘Print receipt’.
- Click Make card and present
a card at the encoder.
17. Present the Discovery card
at the lock.
18. In Orion Service, Configure device
section: click Get network under the
Coordinator tab.
19. Click the plus sign in front of the
thermostat; the lock will appear
in the network tree.
20. Mark the thermostat and click
the Forbid join button.
21. Right click on the thermostat
and choose Get user description .
Make sure that the description says
‘no’ at ‘Join permitted’.