User's Manual

Ju
ly
5
,
201
2
Page
36
of
49
66 8003 002
-
7
4. Click Save to store the tmf version in the
database. The version will appear in the list
below “Versions stored in the database” in
the Module firmware dialog.
5. To enter an optional description for the
tmf version, mark the version in the
Module firmware dialog and click the
Properties button. The Additional note
dialog to the right is shown. Enter a
description and click OK .
6. In the Orion Service software, choose
Download module firmware . Click Query
to list the available module firmware
versions on the VISIONLINE server.
7. Mark the applicable firmware version
and click Download .
8. If applicable, repeat step 7 with other
firmware that is to be uploaded.
9. Plug the service cable into the thermostat or
motion sensor, depending on which module
that is to be upgraded.
10. In the Orion Service software, choose
Upload module firmware . The firmware
version(s) that have been downloaded
according to step 7 above will be shown.
Mark the applicable firmware version and
click Upload .