Operation Manual

•Similarly to the previous steps, with the help of “PROG” button and

the large and/or buttons perform settings until the time and

temperature of switch P6 is set.

•After the temperature of switch P6 has been set, by repeated

pressing of the “PROG” button the set values can be inspected and

data can be modified by repeating the steps described above.

•Afteryouhavesetallvalues,pressthe“SET” button to acknowledge

set values and to go back to the main screen. (After approximately

10 seconds the set values will be automatically acknowledged and

the device will go back to the main screen).

•Set values can be freely modified at any time by repeating the

programming steps.

4.2 Copying a program with the help of the “COPY” button

•Pressthe“SET” button to go back to the main screen.

•Pressthe“COPY” button for approximately 5 seconds to activate