User's Manual

Network RFID Encoder Installation and Operation Instructions Pg. 9 of 13

Setup for USB Connection with System 6000 (continued)

8. Click OK to add the Station ID to system.

9. At this point, the contactless smart

card encoder is installed. You may

now set it to be the default encoder in

the SAFLOK Client program (System

tab, then terminal settings). The

Station ID will appear in both “Station

Assignments for this computer” and

the “Station ID Assignments for the

Entire System” sections in the CRS.

The encoder can now be accessed by any

computer with the SAFLOK software

installed if the PC is on, the user is logged

in, and the CRS program is running.