User's Manual

Network RFID Encoder Installation and Operation Instructions Pg. 8 of 13
© SAFLOK™, all rights reserved. WL 2/6/2009
Setup for USB Connection with System 6000
1. Log on to the Com Request Server (CRS) at the computer
the encoder will be attached to.
Note: The encoder can be added from only the CRS on the
computer that the encoder is attached to because the encoder is
directly connected to that computer.
2. Click the Settings tab, then click the Add button
under “Station ID assignments for this computer”.
3. At the Encoder Type PC dialog box, select
SAFLOK Proximity Encoder and click on OK.
4. Enter the desired Station ID name or number.
5. Select the USB Port that the encoder is attached
to.
6. At the Client Station Add-Mode PC dialog box, click
Test For Encoder.
7. At the Device Test PC dialog box, click OK to
continue.