User's Manual

Network RFID Encoder Installation and Operation Instructions Pg. 4 of 13

Setup for TCP/IP Connection with System 6000

1. Logon to the CRS at any computer on the

network, a TCP/IP encoder can be added from

any CRS because it is not directly connected to

the computer.

2. Click the Settings tab then click the Add button

under station ID assignments for entire SAFLOK

system. Type in the Station ID#, the Port will

default to 5264 and should not be changed. The

encoder IP address will appear minus the last

three digits. Type in the last three digits to assign

the IP address to the encoder. Next, click the

Advanced button.

3. Type in the MAC Address. The MAC address is

found on the bottom of the encoder. If the MAC

address is not available, click Find All and the

screen will display all the TCP/IP encoders

connected to the network.