User's Manual

Network RFID Encoder Installation and Operation Instructions Pg. 10 of 13

Encoding a Keycard or RFID Credential

1. To encode a keycard, open the SAFLOK Client program. Enter

your User ID and Password to log on, then click OK.

2. At the main screen, click on the Keys tab.

3. Click the appropriate Make Keys button (e.g., Make

User Keys, Make Display Keys, etc.) for the keycard

you are making.

4. Following the procedure to make a key, enter the

appropriate information and make the appropriate

selections.

5. At the Additional Information PC dialog box, click Make

Key.

6. Place the RFID credential on the RFID encoder.

• If properly encoded, the green OK light will flash, indicating

readiness to encode another credential.

If not properly encoded, the red ERROR light will illuminate

and the computer screen will display an error message. Follow

the screen prompts and attempt to encode the credential

again.

RFID Encoder