User manual

Computer Gateway User Manual 4-33 5/96
4.4.6
Use information: The abort codes are visible at the Universal Station and can have
any value assignments you wish. Presumably they will be coded
to indicate the apparent reason for aborting the ACP/ACIDP.
Abort code of 0000 (ASCII zeros) indicates a normal termination.
The change to RUN state message is required after receipt by the
host processor of a turn-on message. This confirms to the CG
that the ACP has been activated. If the ACP is connected to an
ACIDP, the change to RUN state is required prior to use of any
messages addressed to the ACIDP.
There is no data-message response to this request.
The operator can change the EXESTAT of an ACIDP from
ABORT to OFF/DELAY through the operator-demand function at
the Universal Station.