User manual

Computer Gateway User Manual 4-28 5/96
4.4.4
Words 55..58—RTPERIOD (8 ASCII characters)
Words 59..62—STIME (8 ASCII characters)
Word 63—RUN_INIT (integer) 0=OFF, 1=ON
Word 64—OPER_DMD (integer) 0=OFF, 1=ON
Word 65—PPS (integer) 0=OFF, 1=ON
Word 66—not used
Word 67—CONF_RQD (integer) 0=OFF, 1=ON
Word 68—TAKE_IP (integer) 0=OFF, 1=ON
Use information: See the Computer Gateway Parameter Reference Dictionary for
descriptions of these parameters, including the mechanisms for
their setup and change. Most of these parameters can be viewed
through standard displays at a Universal Station; see heading 6.3
for details.
Sixteen-Character Tagname Form
Header information: Word 1—Transaction Code = 125
Word 2—Number of Words = 1 (plus 77 if ACIDP found)
Word 5—CG Identifier = 3
Message format: Word 1—return status (integer) 0=normal return
6=valid ACIDP not found
Words 2..9—ACIDP name (16 ASCII characters)
Words 10..21—PTDESC (24 ASCII characters)
Word 22—UNIT (2 ASCII characters)
Words 23..26—KEYWORD (8 ASCII characters)
Words 27..31—bytes 1-9: precollect DDT name (9 ASCII char)
byte 10: packed array of booleans, where
bit 7 (msb) SCH trigger 1=ON 0=OFF
bit 6 PPS trigger 1=ON 0=OFF
bit 5 DMD trigger 1=ON 0=OFF
bits 4-0 are unused
Word 32—ACCESKEY (integer) 0=READONLY
1=READWRIT
Words 33..38—ACPROG (12 ASCII characters)
Word 39—GROUP ID (2 ASCII characters)
Word 40—RCASENB (0=OFF, 1=ON)
Words 41..45—reserved for future use
Word 46—ACT_TYPE (integer) 0=CYCLIC
1=PERIODIC
2=CYC_DMD
3=PER_DMD
4=DEMAND
Word 47—INH_STAT (integer) 0=INHIBIT
1=PERMIT
Word 48—EXECSTAT (integer) 0=ABORT
1=ACCESS
2=DELAY
3=OFF
4=RUN
5=WAIT
6=FAIL