User manual

Computer Gateway User Manual 4-27 5/96
4.4.4
4.4.4 Get ACIDP Status Return
This message from the CG returns all the parameter values for an ACIDP.
Eight-Character Tagname Form
Header information: Word 1—Transaction Code = 25
Word 2—Number of Words = 1 (plus 67 if ACIDP found)
Word 5—CG Identifier = 3
Message format: Word 1—return status (integer) 0=normal return
6=valid ACIDP not found
Words 2..5—ACIDP name (8 ASCII characters)
Words 6..17—PTDESC (24 ASCII characters)
Word 18—UNIT (2 ASCII characters)
Words 19..22—KEYWORD (8 ASCII characters)
Words 23..27—bytes 1-9: precollect DDT name (9 ASCII char),
byte 10: packed array of booleans, where
bit 7 (msb) SCH trigger 1=ON 0=OFF
bit 6 PPS trigger 1=ON 0=OFF
bit 5 DMD trigger 1=ON 0=OFF
bits 4-0 are unused
Word 28—ACCESKEY (integer) 0=READONLY
1=READWRIT
Words 29..34—ACPROG (12 ASCII characters)
Word 35—GROUP ID (2 ASCII characters)
Word 36—ACT_TYPE (integer) 0=CYCLIC
1=PERIODIC
2=CYC_DMD
3=PER_DMD
4=DEMAND
Word 37—INH_STAT (integer) 0=INHIBIT
1=PERMIT
Word 38—EXECSTAT (integer) 0=ABORT
1=ACCESS
2=DELAY
3=OFF
4=RUN
5=WAIT
6=FAIL
Word 39—PROGSTAT (integer) 0=NOT INST
1=TEST
2=RESTRICT
3=NORMAL
Words 40..41—ABORTCOD (4 ASCII characters)
Word 42—not used
Word 43—not used
Word 44—CONFWAIT (integer)
Word 45—not used
Words 46..54—NEXT_RTM (17 ASCII characters)