User manual

Computer Gateway User Manual 4-16 5/96
4.3.2
4.3.2 Restore Complete
This message is returned by the host processor in response to the CG Restore message, but
only after completion of its initialization/synchronization process. Message content must be
identical to that in the original restore message.
Header information: Word 1—Transaction Code = 44
Word 2—Number of Words = 2
Word 5—CG Identifier = 1
Word 6—Host Task Identifier = RS
Message format: Word 1—Restart type (integer) 1=cold restart
2=warm restart
Word 2—Startup message number (integer) that is taken from the
restore message being responded to.
Use information: Until this message has been sent and acknowledged, the host
should send only the following application-level message types:
• Transaction 47/147—CG Database List request
• Transaction 10—Store Internal DDT in CG request
• Transaction 11—Delete Internal DDT from CG request
• Transaction 45/145—Internal DDT Connect or Disconnect
request
• Transaction 21/121—ACIDP Execution State Change request
• Transaction 22/122—ACIDP Program Mode Change request
There is a 3-minute window from dispatch of the Restore message
by the CG for return of the Restore Complete. If this limit is
exceeded, the CG sends another Restore message. Any tardy
response to the original Restore message is ignored by the CG.