User manual

Computer Gateway User Manual 4-125 5/96
4.10.14
4.10.14.2 Break Response
Header information: Word 1—Transaction Code = 63
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..10—Request echo
Word 11—Return status (0 = normal)
Word 12—Return substatus (0 = normal)
Words 13..40—Request echo
4.10.15 Data Out Request
This request/response pair is used to turn on (assign) or turn off (de-assign) the Data Out
file function or to request its on/off status. While the Data Out file is assigned, the file
utility transactions that list data will put ASCII text into that file. The "results" text file can
be transferred to the host by the Read File request.
The request uses one of three sub-command values depending on the action desired.
• Sub-command value 0 (OFF)—Deassigns the "results" text file.
• Sub-command value 1 (ON)—Specifies (assigns) the pathname of the "results" text
file.
• Sub-command value 2 (STATUS)—Requests the on/off status of the "results" text file
and, if it is "on," returns the file pathname.
4.10.15.1 Data Out Request
Header information: Word 1—Transaction Code = 62
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..8—Reserved for future use
Word 9—Command type = 14
Word 10—Sub-command (0 = OFF, 1 = ON, 2 = STATUS)
Word 11—Reserved for response data
Word 12—Reserved for response data
Words 13..26—LCN pathname (PN:nn>vdir>filename.xx or
NET>vdir>filename.xx) for the user volume file
(required by sub-command 1)
Words 27..40—Reserved for response data