User manual

Computer Gateway User Manual 4-124 5/96
4.10.13
4.10.13 Delete Files
This request/response pair is used to delete one or more files from a user-defined volume
on the HM (user volume names must begin with a character other than ! or &). A deleted
file cannot be recovered. Wild card characters can be used to allow selective and multiple
file deletions. The -D option lists the files deleted in the Data Out file if specified.
4.10.13.1 Delete Files Request
Header information: Word 1—Transaction Code = 62
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..8—Reserved for future use
Word 9—Command type = 12
Word 10—Not used
Word 11—Reserved for response data
Word 12—Reserved for response data
Words 13..26—LCN pathname for the user volume file
(NET>vdir>filename.xx or NET:vdir>*.* -D)
Words 27..40—Not used
4.10.13.2 Delete Files Response
Header information: Word 1—Transaction Code = 63
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..10—Request echo
Word 11—Return status (0 = normal)
Word 12—Return substatus (0 = normal)
Words 13..40—Request echo
4.10.14 Break Request
This request/response pair is used to abort a previous file utility transaction command. The
return status in the response message of the aborted request will contain code value 12
(XFR_VAX_REQUESTED_ABORT).
4.10.14.1 Break Request
Header information: Word 1—Transaction Code = 62
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..8—Reserved for future use
Word 9—Command type = 13
Word 10—Not used
Word 11—Reserved for response data
Word 12—Reserved for response data
Words 13..40—Not used