User manual

Computer Gateway User Manual 4-120 5/96
4.10.8
4.10.8 Copy File
This request/response pair is used to copy an HM file and place the copy in a destination
file on an HM. Wild card characters are permitted. The destination suffix must always be
the same as the source suffix. The -D option outputs to the Data Out file if specified in the
destination path.
4.10.8.1 Copy File Request
Header information: Word 1—Transaction Code = 62
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..8—Reserved for future use
Word 9—Command type = 7
Word 10—Not used
Word 11—Reserved for response data
Word 12—Reserved for response data
Words 13..26—LCN pathname for the HM source file
(PN:nn>vdir>filename.xx or NET>vdir>filename.xx
or NET>vdir>*.*)
Words 27..40—LCN pathname for the HM destination file
(PN:nn>vdir>filename -D or NET>vdir>filename -D
or NET>vdir>= -D)
4.10.8.2 Copy File Response
Header information: Word 1—Transaction Code = 63
Word 2—Number of Words = 40
Word 5—CG Identifier = 2
Message format: Words 1..10—Request echo
Word 11—Return status (0 = normal)
Word 12—Return substatus (0 = normal)
Words 13..40—Request echo
4.10.9 Move File
This request/response pair is used to move a file from one directory to another directory in
the same HM volume. Wild cards are supported in file names to allow multiple or selective
file movement. The -D option lists file names into the specified Data Out file.
4.10.9.1 Move File Request
Header information: Word 1—Transaction Code = 62
Word 2—Number of Words = 40
Word 5—CG Identifier = 2