User guide

3. Touch Driver Installation
3.1. Introduction
The DisplayPac-WN supports the ELO AccuTouch touchscreen system, which consists of a touchscreen and an
electronic touchscreen controller.
The DisplayPac-WN touch device uses a RS-232 interface touch controller card via the COM3 port inside the
DisplayPac-WN. When the touch driver is installed, the ELO system will detect COM4 port automatically.
The ELO AccuTouch touchscreen is based on patented resistive technology. It is installed over the face of the
display. Since its shape matches of the display face, the touchscreen has excellent clarity and minimal parallax.
3.2. The ELO AccuTouch Driver Installation
ELO AccuTouch driver software provides a consistent software interface among all ELO AccuTouch touch screens
and controllers.
Go to http://www.elotouch.com/Support/dnld.asp for a complete list of available drivers.
For Driver Installation, please install the “ELO Touch System Touch Tools CD” for Windows XP, Windows 2000,
Windows Me, Windows 98, Windows 95, Windows NT, Windows CE 2.x, 3.0, 4.x, Windows XP Embedded, Windows
3.1, DOS, OS/2 Warp, and Apple Macintosh. Just follow the step-by-step instructions to install the driver.
Choose “Auto-detect ELO devices ” in the first step. If not, the following step will require users to choose COM3 port
for detecting the devices.
DisplayPac-WN Hardware User Guide 3-1