User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
127
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
Step 2 Create, view, or edit the comment.
Step 3 Click OK.
11.3 Reports
The Report menu provides several reports to assist you in analyzing
Bluetooth™ traffic recorded by the analyzer.
File Information
To display a File Information report,
• Select File Information under Report in the Menu Bar
OR
Click in the Tool Bar.
You see the File Information screen:
The File Information report provides valuable information about how the
recording was made, what the buffer settings were, what the trigger options
were, and what version of all the analyzer hardware was used to make the
recording.
Error Summary
The Error Summary command displays an error summary of the current
trace file and allows you to go to a specific packet, and save the error file to
a uniquely named file.