User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
118
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
Header AM_Addr
Select an Active Member Address from the list.
DataLength
Not yet implemented. Will allow searching based on data length in bytes from
the recording.
Lmp Opcode
Select the Link Management Protocol Operational Code (Lmp Opcode) that you
want to go to.