User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
50
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
marked Show Devices Found.
A screen will display showing the devices that Merlin discovered
through the General Inquiry:
If you feel that the list is incomplete, you can close this window and press
the button marked Repeat. This will cause Merlin to repeat the General
Inquiry and recollect information on local Bluetooth devices.
Step 11 Press OK to close the Bluetooth Neighborhood window.
Step 12 Press Next to advance to the next screen.
The following screen will prompt you for the Master device’s address.
The address can be selected from the drop-down menu or typed into the
box:
Step 13 Select or type in the Master device’s address into the box