User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
103
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
If your Data Trace View is currently expanded, you see the Collapse
Data menu:
If your Data Trace View is currently collapsed, you see the Expand Data
menu:
Note that you can choose to expand or collapse
• Only the Data in the selected Data packet
OR
• All Data Fields in the Trace View.
Step 2 Select the desired Expand Data or Collapse Data menu item.
The Trace View is repositioned with the selected packet(s) adjusted in
the format you have specified.
9.7 Hide Frequency Hops
You can hide Frequency Hops (Hops) from a trace by pressing the Hide
Hops button on the Tool Bar:
From the Tool Bar
• Click to hide all Hop packets.
9.8 Hide Nulls and Polls
You can hide Nulls and Polls from a trace by pressing the Hide Nulls and
Polls button on the Tool Bar.
From the Tool Bar
• Click to hide all Nulls and Polls.