User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
94
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
• All packets are colored with a + color when there is no Trigger.
Use the color buttons labeled + and - under the Packet # section of the
Colors screen to select a Trigger color.
To select or change a color,
• Click the appropriate color button.
You see the color palette:
Use this palette to choose the desired color for the Packet Types,
Miscellaneous, Integrity, Handshake, Packet #, Access Codes, Data, Idle
and Timestamp.