User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
46
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
Step 2 Press Next to advance to the next screen.
You will see three choices:
Step 3 Select the second option: I want Merlin to record traffic
on a piconet that has already been established.
Step 4 Press Next.
You will see four choices:
Select the hop mode appropriate to your area.
Step 5 Select the hop mode appropriate to your area, then press
Next.