User Manual Part 2
Table Of Contents
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- 12. How to Contact CATC
- 13. Warranty and License
56
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
Step 2 Press Next to advance to the Recording Type screen.
The following screen will display:
Step 3 Select the third option: I am using Bluetooth Test Mode
and want Merlin to record traffic on my test piconet.
Step 4 Press Next.
The following screen will display: