User Manual Part 1

34
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
The Wizard advances to the next screen which presents three options:
• Establish a new piconet and have Merlin record traffic on
that piconet.
This option causes Merlin to perform an Inquiry so it can discover local
devices and then establish a new piconet and record the piconet traffic.
• Record traffic on a piconet that has already been established.
This option lets Merlin record traffic from an already established piconet.
• Record traffic in Test Mode on a test piconet.
This option lets Merlin create either a single frequency range recording
of a range that you specify or create a recording of a limited hop
frequency range consisting of 5 frequency hops.
6.1 Recording a Traffic on a New Piconet
The New Piconet option shown in the previous screen presents users with
the means of recording the traffic from a new piconet. This option will
cause a sequence of screens to prompt you for information such as the
piconet Master address.
The following steps shows you how to configure Merlin to record a new
piconet.
Step 1 From the screen shown in the previous screenshot, select the
first option: I want to establish a new piconet and have
Merlin record traffic on that piconet, then press Next.