User Manual Part 1

22
Merlin Bluetooth Analyzer User’s ManualCATC Version 1.6
When the second upgrade has finished, you will see the following
message telling you that the upgrade is complete.
Step 5 Power cycle Merlin to complete the upgrade.
Manual Upgrades to BusEngine and Firmware
You can manually upgrade Merlin’s Firmware and/or BusEngine by
performing the following steps:
Step 1 Select Analyzer under Setup on the Menu Bar.
You see the Analyzer Setup screen:
Step 2 Click Reset Analyzer
The Analyzer resets, performs self-diagnostics, and returns to service.
Note The self-diagnostics should complete about five seconds after the trigger LED
lights. If the diagnostics fail, the trigger LED blinks on and off continually,
indicating faulty hardware. If this occurs, contact CATC for customer support.
Upgrading the BusEngine
The BusEngine core is the heart of the Merlin Analyzer. Using
state-of-the-art PLD technology, it incorporates both the high speed
recording engine and the configurable building blocks that implement
data/state/error detections, triggering, capture filtering, external signal