User Manual Part 1

21
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
begin an upgrade process for the BusEngine and Firmware. If you prefer,
you can abort this upgrade and undertake the steps manually as described
later in this chapter.
To perform an automatic BusEngine and Firmware upgrade,
Step 1 If needed, upgrade the Merlin software using the steps
outlined in "Software Upgrades" described above.
Step 1 Turn on the Analyzer.
Step 2 On the toolbar, click the button.
Since the BusEngine and/or the Firmware are incompatible with the
current Merlin software version, an error message will appear displaying
your current versions and indicating what versions you need to install.
Step 3 Click Yes.
The above window closes and the Analyzer Setup window opens.
Step 4 Click Update BusEngine or Update Firmware on the
Analyzer Setup screen.
You can select only one item at this point. If both the BusEngine and the
Firmware need to be updated, the upgrade will complete for the first item
and then return to the above screen so the second upgrade can be
performed.