User Manual Part 1

9
Merlin Protocol Analyzer User’s ManualCATC Version 1.6
Step 3 Select the Modes tab.
The following dialog box will open showing factory default settings.
Merlin defaults to “General Inquiry.” For this recording, leave most of
these settings unchanged. If you are recording a Hop Frequency that is
not 79 Hops Standard, you will need to select the appropriate standard
from the Hop Frequency menu below.
Step 4 Click OK to activate the recording options you selected.
At this point, Merlin will be ready to record.
Step 5 Click on the Tool Bar.
Merlin starts to record the Bluetooth™ traffic immediately. The
Bluetooth™ Inquiry process will proceed for 20 seconds. After 20
seconds has elapsed, the analyzer uploads the data and displays the
packets.
Step 6 If you wish to terminate the recording before the snapshot
automatically completes, click on the Tool Bar.