User's Manual
Table Of Contents
- 7. Display Options
- 8. Reading a CATC Trace
- 8.1 Trace View Features
- 8.2 Interpreting the Displayed Information
- 8.3 Tooltips
- 8.4 Set Marker
- 8.5 Edit or Clear Marker
- 8.6 Adding Comments to a Trace File
- 8.7 Expanded and Collapsed Data Formats
- 8.8 Hide Frequency Hops
- 8.9 Hide Nulls and Polls
- 8.10 Menus in Clicked Fields
- 8.11 Hide Unassociated Traffic
- 8.12 Hide Channel
- 8.13 Hide Duplicated Traffic
- 9. Searching Traces
- 10. Decoding Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Decoding via the Profiles Toolbar
- 10.10 Changing Protocol Assignments
- 10.11 Encryption
- 10.12 Re-applying Encryption Settings
- 11. Reports & Exporting Data
- Appendix A: Merlin II Clock Calibration
- How to Contact CATC
- Limited Hardware Warranty
169
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
session 11
type 65
Recording Options
events 77
general 10, 63, 65
in Wizard 43
saving 92
Recording type 46
Recv, DUT freq 69
Reduced hops 56
Reports
menu 21
Restart button 86
Resynchronization, forced 73
RFCOMM 126
S
Sample
recording 11
Saving
recording options 92
SDP Msg 126
Search 40
duration of 48
general 50
Search menu 21
Search options 54
Search type 38, 48
Searching
by data pattern 120
complex 116
data length 114
for bit pattern 121
for bit patterns 121
for errors 116
Header AM_Addr 114
L2Cap CID 116
Lmp Opcode 115
packet types 113
recorded traffic 111
Security 136
SEQN condition 80
Sequence
event 91