User's Manual
Table Of Contents
- 7. Display Options
- 8. Reading a CATC Trace
- 8.1 Trace View Features
- 8.2 Interpreting the Displayed Information
- 8.3 Tooltips
- 8.4 Set Marker
- 8.5 Edit or Clear Marker
- 8.6 Adding Comments to a Trace File
- 8.7 Expanded and Collapsed Data Formats
- 8.8 Hide Frequency Hops
- 8.9 Hide Nulls and Polls
- 8.10 Menus in Clicked Fields
- 8.11 Hide Unassociated Traffic
- 8.12 Hide Channel
- 8.13 Hide Duplicated Traffic
- 9. Searching Traces
- 10. Decoding Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Decoding via the Profiles Toolbar
- 10.10 Changing Protocol Assignments
- 10.11 Encryption
- 10.12 Re-applying Encryption Settings
- 11. Reports & Exporting Data
- Appendix A: Merlin II Clock Calibration
- How to Contact CATC
- Limited Hardware Warranty
164
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
F
Features 3
FEC Error 83
FHS packet 80
File information, displaying 142
File menu 21
Filename and data 10
Filter In/Out button 85
Filter Out/In 88
Filtering 78, 80
Find feature, using 121
Finding 116
Finding devices 38
Flow 104
Fonts 146
Force resynchronization 73
Frequencies, DUT 69
Frequency hops, hiding 108
G
General description 2
General features 3
General inquiry 72, 76
General options
recording 63
General purpose output 90
Go to
DataLength 114
error 116
Header AM_Addr 114
L2Cap CID 116
Lmp Opcode 115
marker 112
packet types 113
packet/Message/Protocol 111
Graphs
areas menu 146
bus utilization 144
buttons 146
Grid
lines 145
on Top 145
Groups, events 77