User's Manual
Table Of Contents
- 7. Display Options
- 8. Reading a CATC Trace
- 8.1 Trace View Features
- 8.2 Interpreting the Displayed Information
- 8.3 Tooltips
- 8.4 Set Marker
- 8.5 Edit or Clear Marker
- 8.6 Adding Comments to a Trace File
- 8.7 Expanded and Collapsed Data Formats
- 8.8 Hide Frequency Hops
- 8.9 Hide Nulls and Polls
- 8.10 Menus in Clicked Fields
- 8.11 Hide Unassociated Traffic
- 8.12 Hide Channel
- 8.13 Hide Duplicated Traffic
- 9. Searching Traces
- 10. Decoding Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Decoding via the Profiles Toolbar
- 10.10 Changing Protocol Assignments
- 10.11 Encryption
- 10.12 Re-applying Encryption Settings
- 11. Reports & Exporting Data
- Appendix A: Merlin II Clock Calibration
- How to Contact CATC
- Limited Hardware Warranty
149
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
Real-Time Statistical Monitor Pop-up Menu
If you right-click a graph in the Real-Time window, a
pop-up menu will appear with options for changing the
format of the display.
Undo Zoom - If you have zoomed in, this command will
undo the zoom.
Fit to Graph Area - Redisplays graph so that the entire
trace fits inside graph area.
Y Scale Type -·
Linear - Converts display to linear format.
Logarithmic - Converts display to logarithmic format.
Hide - Hides the selected graph.
Properties - Opens a dialog box with options for changing the colors, titles
and other features of the graphs.
Displaying Multiple Graphs
The Real Time Statistics window gives you the ability to create up to three
separate graphing windows so that you can create separate graphs of traffic
and tile them vertically. Within these windows, you can format the graphs
in a number of ways.
Horizontal zoom in
Graph Areas - Presents options for
displaying additional graphs of data lengths,
packet lengths, and percentage of bus
utilized.
Horizontal zoom out
Start. Starts the Real-Time Monitor.
Stop Real-Time Monitoring.
Reset. Resets the graphs.