User's Manual

143
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
11.3 Error Summary
The Error Summary command opens the Traffic Summary dialog box and
displays an error summary of the current trace file. The dialog box allows
you to go to a specific packet, and save the error file to a uniquely named
file. See the discussion below on Traffic Summary for more information.
11.4 Timing Calculations
Starts the modeless calculator dialog for calculating various timing and
bandwidth parameters in the recording file.
To display a File Information report,
• Select Timing Calculations under Report in the Menu Bar
OR
Click in the Tool Bar.
You see the Timing and Bus Usage Calculator screen:
To calculate bus usage and bit rate errors,
Step 1 Enter the range of packets to be examined in the text boxes
marked "From packet" and "To packet."
Step 2 If you wish to limit your calculations to a single device,
select the device’s address from the LT Address drop-down
menu.
Step 3 Click the "Calculate" button.
At this point, bus usage will be calculated.