User's Manual
Table Of Contents
- 7. Display Options
- 8. Reading a CATC Trace
- 8.1 Trace View Features
- 8.2 Interpreting the Displayed Information
- 8.3 Tooltips
- 8.4 Set Marker
- 8.5 Edit or Clear Marker
- 8.6 Adding Comments to a Trace File
- 8.7 Expanded and Collapsed Data Formats
- 8.8 Hide Frequency Hops
- 8.9 Hide Nulls and Polls
- 8.10 Menus in Clicked Fields
- 8.11 Hide Unassociated Traffic
- 8.12 Hide Channel
- 8.13 Hide Duplicated Traffic
- 9. Searching Traces
- 10. Decoding Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Decoding via the Profiles Toolbar
- 10.10 Changing Protocol Assignments
- 10.11 Encryption
- 10.12 Re-applying Encryption Settings
- 11. Reports & Exporting Data
- Appendix A: Merlin II Clock Calibration
- How to Contact CATC
- Limited Hardware Warranty
116
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
L2Cap CID
Select the L2Cap Channel ID (L2 Cap CID) that you want to go to.
Error
Moves trace view to next uncorrected error.
Soft Bit Error
Moves trace view to next soft (corrected) error.
Loss of Sync
Moves trace viewer to the next loss of sync.
Find
Find is a utility that allows you to conduct searches of one or more events
within a trace. Find allows you to search different hierarchical levels within
the trace - packets, LMP Messages, L2CAP messages etc.
To start find,
• Select Find... under Search on the Menu Bar
OR
Click in the Tool Bar.