User's Manual

Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30

Set... - Opens a dialog box for selecting the channels you would like Merlin

II to use.

LT_ADDr to Follow: Select devices to be followed.

Start with Predefined Channel Map: Tells Merlin II whether

to use the selected channel map from the table. Select an AFH

sequence from the list, check Start with Predefined Channel

Map, then click OK.

Add ...: Opens a dialog box for selecting multiple channels. You

can shift-click or control-click to select or deselect multiple

channels. Add a name to the box marked Name and then click OK

to close the dialog box and keep your selection.

Edit ...: Opens the dialog box shown above and lets you change the

current settings.

Delete: Deletes the selected AFH sequence.