User's Manual

21
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
4. Software Overview
4.1 The Main Display Windows
While some of the analyzer’s Main Display window options are familiar,
many contain options specific to the analyzer program.
Table 1: Main Display Pull-Down Windows
Menu Function
File
Open… Opens a file
Close Closes the current file
Save As… Saves all or a specified range of packets from the current file with a
specified name
Re-apply Encryption
Settings ...
If a trace has been recorded with the wrong encryption settings, you
can enter the correct ones via the Device List, then run File>
Re-apply Encryption Settings ... This command will open a Save As
dialog box for creating a new trace file using the new settings.
Print… Prints part or all of the current traffic data file
Print Prev
iew Produces an on-screen preview before printing
Print Setup… Sets up your current or new printer
Edit Comment… Creates or edits the Trace file comment field
Export
» Packets to
Text (Packet View
Format)
Saves all or part of a trace to a text file
Export
» Packets to
CSV Text
Saves all or part of a trace to a Comma Separated Values (CSV) file
suitable for viewing in a spreadsheet application
Export
>>Audio
Streams
Saves audio data into a file. Presents options for setting the Audio
Source format, Output File format, Stream Direction, and Output
Sampling
Last File Lists the last files that were opened
Ex
it Exits the Merlin II program
Setup
Display Options Provides the control of various display options such as color, formats,
and filters.
R
ecording Options Opens a dialog box with checkboxes and drop-down menus for
setting up a recording.
Recording W
izard Starts a sequence of interactive dialog boxes that configures Merlin II
for a recording. This utility provides an alternative to the Recording
Options dialog box.
Update BE/FW Allows the operator to update the BusEngine and Firmware.