User's Manual

12
Merlin II Protocol Analyzer User’s ManualCATC SW Version 2.30
When the recording session is finished, the bus traffic is saved to the hard drive as
a file named data.tfb or whatever name you assign as the default filename. While
the file is being saved, you should see a brown progress bar at the bottom of the
screen. When the bar turns white, it indicates that the data has been saved to disk.
Step 6 To save a current recording for future use, select File > Save As or
click on the tool bar.
You see the standard Save As screen.
Step 7 Give the recording a name and save it to the appropriate directory.
2.7 External Interface Breakout Board
The External Interface Breakout Board is an accessory that allows standard,
LV TTL signals to be connected to the analyzer for triggering. The breakout
board consists of two BNC connectors for "EXT IN" and "EXT OUT"
signals. The EXT IN connector can be used to import trigger signals from