User's Manual

Table Of Contents

CATC MERLIN MOBILE 1.00 CHAPTER 3

User’s Manual Merlin Mobile User Interface

DRAFT

Table 3-3: Record Menu Commands

Command Function

Start Starts a recording session

Stop Stops a recording session

Inquiry > Hop

Sequence/Inquiry Type

Sets the hop sequence and inquiry type for an Inquiry Recording

Piconet > Hop Sequence/Sync

Method

Sets the hop sequence and sync method for a Piconet Recording

Table 3-4: Report Menu Commands*

Command Function

File Information Displays the File Information window, which provides information about the

active file and its recording conditions

Error Summary Displays the Error Summary window, which details the errors in a file

Timing Calculations Opens the Timing and Bus Usage calculator dialog, which is used to set up

calculation of timing and bus usage

Traffic Summary Opens the Traffic Summary window, which displays a detailed, interactive report

of all the packets in the active Trace

*The Report menu is available only when a Trace (.blt) file is active in the Display Area.

Table 3-5: Search Menu Commands*

Command Function

Go to Trigger Jumps to the packet immediately preceding the trigger event

Go to Packet/Message/Protocol Opens the Go to Packet/Message/Protocol dialog, which is used to specify a

packet or marker, then jumps to the specified packet

Go to Marker > Packet #

(marker)

Jumps to the specified marker

Go to > Event type > Event Jumps to the specified event

Find Opens the Find dialog, which is used to set search parameters

Find Next Repeats the previous Find operation

Search Direction

Forward/Backward

The current search direction; selecting it reverses the search direction

*The Search menu is available only when a Trace (.blt) file is active in the Display Area.

Table 3-6: View Menu Commands

Command Function

Toolbars > Toolbar name Shows or hides the selected toolbar

Status Bar Shows or hides the Status bar

Unhide cells > Field name Reveals the selected field (available only if cells are hidden)

Zoom In Increases the display size of the active Trace file

Zoom Out Decreases the display size of the active Trace file

Wrap Toggles on or off wrapping of displayed packets to fit in the window