User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
57
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
Step 17 Press Next
BTTracer will then display your current settings.
The Advanced button will open the Recording Options dialog box
shown on page 46 and described in detail in Chapter 7.
Step 18 Press Next to begin the recording.
If the BTTracer hardware is not ready or connected or is in the process
of booting up, the following information message box will display:
Step 19 If the above information box opened, press OK to close it.