User's Manual
Table Of Contents
- Table of Contents
- 1. Overview
- 2. Quick Installation
- 3. Detailed Installation
- 4. Updates
- 5. Software Overview
- 6. Recording Wizard
- 7. Recording Options
- 8. Display Options
- 9. Reading a CATC Trace
- 10. Decoding Higher Protocols
- 10.1 Introduction
- 10.2 LMP and L2CAP Messages
- 10.3 Decoding and Viewing Higher Protocol Data
- 10.4 Tooltips
- 10.5 Viewing Packets in LMP and L2CAP Messages
- 10.6 Types of LMP and L2CAP Messages
- 10.7 Viewing L2CAP Channel Connections
- 10.8 Viewing Protocol Messages and Transactions
- 10.9 Changing Protocol Assignments
- 11. Other Features
- How to Contact CATC
- Warranty and License
- Index
37
BTTracer Protocol Analyzer User’s ManualCATC Version 1.0
6. Recording Wizard
Recording Wizard is an interactive utility that presents a series of
user-friendly dialog boxes for setting up a recording session. Recording
Wizard serves as an alternative method of configuring the Recording
Options dialog box. When you are finished using the Wizard, you can view
your settings in the Recording Options window. By providing data to the
prompts in the Wizard’s dialog boxes, you configure BTTracer for a
recording session.
Starting Recording Wizard
To start the Recording Wizard,
• Click on the Tool Bar or select Recording Wizard under
Setup on the Menu Bar.
You s e e the Recording Options window:
The Recording Options window has three buttons marked Next, Back,and
Cancel that allow you to move forward or backward through the wizard or
to cancel the wizard.
To begin advancing through the wizard,
•ClickNext to see the options for the three types of recordings that
the Recording Wizard can make.