User Manual

133
CATC MERLIN’S WAND 1.22 APPENDIX A
User’s Manual Command Generator Command Descriptions
Start_TCS_Call
This command must be called right after TCSOpenChannel. It
automatically sends a sequence of TCS messages according to the Intercom
profile specification of the TCS state machine. After successful execution
of this command, TCS state machine is in ACTIVE state and SCO
connection is opened.
Disconnect_TCS_Call
This command is called to close an existing TCS connection according to
the Intercom profile specification of the TCS state machine, close the
L2CAP connection, and close the SCO connection.
Send_Info_Message
This command can be called after a TCS channel is opened. It sends an
INFORMATION TCS message with a called party number.
Return Events
Open_TCS_Channel_Complete
Open_TCS_Channel_Failed
Command Parameters Examples Comments
N/A
Return Events
Start_TCS_Call_Complete
Start_TCS_Call_Error
Command Parameters Examples Comments
N/A
Return Events
Disconnect_TCS_Call_Complete
Disconnect_TCS_Call_Error
Command Parameters Examples Comments
Phone_Number 408 727 6600 Phone number may contain
up to 10 digits.
Return Events
Send_Info_Complete
Send_Info_Error