User Manual

130
CATC MERLIN’S WAND 1.22 APPENDIX A
User’s Manual Command Generator Command Descriptions
SendTest
This command causes Merlin’s Wand to sent a test frame to a remote device
over the specified channel.
SetLineStatus
This command will send the LineStatus command to the remote device. It
allows the RFCOMM user to communicate overrun framing and parity
errors to the remote device.
Data Pipe Pipe1 Data Pipe should be created
in the Data Transfer
Manager
Return Events
SendData_Complete
SendData_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Return Events
SendTest_Complete
SendTest_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02) LineStatus Values:
LineStatus 0x0F 0x01 -- Set to indicate an
error.
0x02 -- Set to indicate an
overrun error.
0x04 -- Set to indicate a
parity error.
0x08 -- Set to indicate a
framing error.
Return Events
SetLineStatus_Complete
SetLineStatus_Failed
Command Parameters Examples Comments