User Manual

129
CATC MERLINS WAND 1.22 APPENDIX A
User’s Manual Command Generator Command Descriptions
Parameter Values:
BaudRate: Specifies the baud rate. Note that the baud rate setting does not
actually affect RFCOMM throughput.
Values: 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230400
DataFormat: The following values identify the number of data bits.
Valu es:
0x00 -- DATA_BITS_5
0x02 -- DATA_BITS_6
0x01 -- DATA_BITS_7
0x03 -- DATA_BITS_8
Flow Control:
Valu es:
0x00 -- FLOW_CTRL_NONE
0x01 -- XON_ON_INPUT
0x02 -- XON_ON_OUTPUT
0x04 -- RTR_ON_INPUT
0x08 -- RTR_ON_OUTPUT
0x10 -- RTC_ON_INPUT
0x20 -- RTC_ON_OUTPUT
Xon:
Value: Default Xon char -- 0x11
Xoff:
Value: Default Xoff char -- 0x13
RequestPortStatus
This command will request the status of the PortSettings for the remote
device.
SendData
Causes Merlin’s Wand to send data by pipe value to remote device over the
specified channel.
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
Return Events
RequestPortStatus_Complete
RequestPortStatus_Error
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)