User Manual

117
CATC MERLIN’S WAND 1.22 APPENDIX A
User’s Manual Command Generator Command Descriptions
CATC_Change_Headset_Gain
Controls the gain of the microphone or speaker of the headset.
CATC_Read_Headset_Gain
Reads the gain of the microphone or speaker of the headset.
BER_Packet_Type 03 0x00=DH1
0x01=DH3
0x02=DH5
0x03=DM1
0x04=DM3
0x05=DM5
Test_Data_Type 00 0x00=Send PBRS (same as
in Bluetooth test mode)
0x01=Every octet that is
sent equals Test_Data
Test_Data FF Data to send
BER_Interval 10 A packet is sent every
BER_Interval frame
Return Events
CATC_BER_Test_Complete
CATC_BER_Test_Error
Command Parameters Examples Comments
Device “Speaker” “Microphone” or “Speaker”
(“Speaker” is default)
Gain 0 0x00 - 0x0F
Return Events
CATC_Change_Headset_Gain_Complete
CATC_Change_Headset_Gain_Error
Command Parameters Examples Comments
Device “Speaker” “Microphone” or “Speaker”
(“Speaker” is default)
Return Events
CATC_Read_Headset_Gain_Complete
CATC_Read_Headset_Gain_Error
Command Parameters Examples Comments