User Manual

97
CATC MERLIN’S WAND 1.22 APPENDIX A
User’s Manual Command Generator Command Descriptions
process. The Clock_Offset parameter is the difference between its own
clock and the clock of the remote device with BD_ADDR. Only bits 2
through 16 of the difference are used and they are mapped to this parameter
as bits 0 through 14 respectively. A Clock_Offset_Valid_Flag, located in bit
15 of the Clock_Offset command parameter, is used to indicate if the Clock
Offset is valid or not.
Set_Connection_Encryption
Set_Connection_Encryption is used to enable and disable the link-level
encryption.
Command Parameters Examples Comments
BD ADDR 0x010203040506
Page Scan Rep Mode 0x0 0x00=R0; 0x01=R1;
0x02=R2
Page Scan Mode 0x0 0x00=Mandatory Page
Scan Mode
0x01=Optional Page Scan
Mode I
0x02=Optional Page Scan
Mode II
0x03=Optional Page Scan
Mode III
Clock Offset 0x0 Bit Format:
Bit 14.0 = Bit 16.2 of
CLKslave -
CLKmaster.
Bit 15 = Clock_Offset_
Valid_Flag where
0= Invalid Clock Offset
1=Valid Clock Offset
Return Events
Remote_Name_Request_Complete
Remote_Name_Request_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
Encryption_Enable 1 Range: 0 or 1
Return Events
Set_Connection_Encryption_Complete
Set_Connection_Encryption_Error