User Manual

87
CATC MERLIN’S WAND 1.22 CHAPTER 8
User’s Manual Using Merlin to Record Merlin’s Wand Traffic
the local machine, and try again. If the problem persists, restart the
remote machine.
• Make sure the local computer (the Windows 2000 system running
Merlin’s Wand) can reach the remote machine by using its full computer
name, such as <computername.domain>. Open a command prompt and
use the PING command to determine this. If the local computer cannot
communicate with the remote machine, consult a system administrator
for assistance.
• If the remote machine is running TCP/IP, make sure it has an assigned IP
address. Consult a system administrator for assistance in determining
this and, if necessary, assigning an IP address.