User Manual

228
CATC MERLIN’S WAND 1.22 APPENDIX C
User’s Manual Merlin’s Wand Scripting Commands
RFRequestPortSettings()
RFRequestPortSettings(Address, DLCI, BaudRate,
DataFormat, FlowControl, Xon, Xoff)
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device
Can use “CONNECTED_DEVICE” to request
port settings on a master RFCOMM connection.
Note that this will work only if exactly one
device is connected via RFCOMM.
DLCI Data link con-
nection identi-
fier
The DLCI is returned by RFOpenClientChan-
nel()
BaudRate String contain-
ing the baud
rate
Can be “2400”, “4800”, “7200”, “9600”,
“19200”, “38400”, “57600”, “115200”,
“230400”
DataFormat List of strings
containing
data bits, stop
bits, and parity
settings
Can be “RF_DATA_BITS_5”,
“RF_DATA_BITS_6”, “RF_DATA_BITS_7”,
“RF_DATA_BITS_8”, “RF_STOP_BITS_1”,
“RF_STOP_BITS_1_5”,
“RF_PARITY_NONE”, “RF_PARITY_ON”,
“RF_PARITY_TYPE_ODD”,
“RF_PARITY_TYPE_EVEN”,
“RF_PARITY_TYPE_MARK”,
“RF_PARITY_TYPE_SPACE”,
“RF_DATA_BITS_MASK”,
“RF_STOP_BITS_MASK”,
“RF_PARITY_MASK”,
“RF_PARITY_TYPE_MASK”
FlowControl List of strings
indicating port
flow control
options
Can be “RF_FLOW_CTRL_NONE”,
“RF_XON_ON_INPUT”,
“RF_XON_ON_OUTPUT”,
“RF_RTR_ON_INPUT”,
“RF_RTR_ON_OUTPUT”,
“RF_RTC_ON_INPUT”,
“RF_RTC_ON_OUTPUT”,
“RF_FLOW_RTS_CTS”,
“RF_FLOW_DTR_DSR”,
“RF_FLOW_XON_XOFF”
Xon Number indi-
cating the
XON charac-
ter
Xoff Number indi-
cating the
XOFF charac-
ter