User Manual
Table Of Contents
- Appendix B: Command Generator Examples
- B.1 Device Discovery and Remote Name Request
- B.2 Establish Baseband Connection
- B.3 Baseband Disconnection
- B.4 Create Audio Connection
- B.5 L2CAP Connection
- B.6 L2CAP Channel Disconnect
- B.7 SDP Profile Service Search
- B.8 SDP Reset Database and Add Profile Service Record
- B.9 RFCOMM Client Channel Establishment
- B.10 RFCOMM Client Channel Disconnection
- B.11 RFCOMM Register Server Channel
- B.12 Establish TCS Connection
- B.13 OBEX Server Init
- B.14 OBEX Client Connection and Client Get & Put
- Appendix C: Merlin’s Wand Scripting Commands
- C.1 Bluetooth Addresses
- C.2 Basic Commands
- C.3 Pipe Commands
- C.4 HCI Commands
- HCIAcceptConnectionRequest()
- HCIAddSCOConnection()
- HCIAuthenticationRequested()
- HCICatcBerTest()
- HCICatcChangeHeadsetGain()
- HCICatcEnterTestMode()
- HCICatcReadHeadsetGain()
- HCICatcReadRevisionInformation()
- HCICatcSelfTest()
- HCICatcTestControl()
- HCICatcWriteCountryCode()
- HCIChangeConnectionLinkKey()
- HCIChangeConnectionPacketType()
- HCIChangeLocalName()
- HCIDeleteStoredLinkKey()
- HCIEnableDeviceUnderTestMode()
- HCIExitParkMode()
- HCIExitSniffMode()
- HCIHoldMode()
- HCIMasterLinkKey()
- HCIParkMode()
- HCIPINCodeRequestNegativeReply()
- HCIPINCodeRequestReply()
- HCIQoSSetup()
- HCIReadAuthenticationEnable()
- HCIReadBDADDR()
- HCIReadBufferSize()
- HCIReadClockOffset()
- HCIReadConnectionAcceptTimeout()
- HCIReadCountryCode()
- HCIReadCurrentIACLAP()
- HCIReadEncryptionMode()
- HCIReadLinkPolicySettings()
- HCIReadLinkSupervisionTimeout()
- HCIReadLocalName()
- HCIReadLocalSupportedFeatures()
- HCIReadLocalVersionInformation()
- HCIReadLoopbackMode()
- HCIReadNumberOfSupportedIAC()
- HCIReadPageScanMode()
- HCIReadPageScanPeriodMode()
- HCIReadPageTimeout()
- HCIReadPINType()
- HCIReadRemoteSupportedFeatures()
- HCIReadRemoteVersionInformation()
- HCIReadScanEnable()
- HCIReadSCOFlowControlEnable()
- HCIReadStoredLinkKey()
- HCIReadVoiceSetting()
- HCIRejectConnectionRequest()
- HCIRemoveSCOConnection()
- HCIReset()
- HCIRoleDiscovery()
- HCISetConnectionEncryption()
- HCISetEventFilter()
- HCISniffMode()
- HCISwitchRole()
- HCIWriteAuthenticationEnable()
- HCIWriteConnectionAcceptTimeout()
- HCIWriteCurrentIACLAP()
- HCIWriteEncryptionMode()
- HCIWriteLinkPolicySettings()
- HCIWriteLinkSupervisionTimeout()
- HCIWriteLoopbackMode()
- HCIWritePageTimeout()
- HCIWritePINType()
- HCIWriteScanEnable()
- HCIWriteStoredLinkKey()
- HCIWriteVoiceSettings()
- C.5 OBEX Commands
- C.6 RFCOMM Commands
- RFCloseClientChannel()
- RFOpenClientChannel()
- RFRegisterServerChannel()
- RFSendData()
- RFSendDataFromPipe()
- RFReceiveData()
- RFWaitForConnection()
- RFAcceptChannel()
- RFAcceptPortSettings()
- RFCreditFlowEnabled()
- RFRequestPortSettings()
- RFRequestPortStatus()
- RFSetLineStatus()
- RFSetModemStatus()
- RFSendTest()
- RFAdvanceCredit()
- C.7 TCS Commands
- C.8 L2CAP Commands
- C.9 SDP Commands
- C.10 Merlin Commands
- Appendix D: CATC Scripting Language
245
CATC MERLIN’S WAND 1.22 APPENDIX C
User’s Manual Merlin’s Wand Scripting Commands
Example
result = L2CAPSendData(0x40, "test data");
Trace("Result : ", result, "\n");
L2CAPSendDataFromPipe()
L2CAPSendDataFromPipe(ChannelID, PipeName)
Return value
• “Success”
• “Timed out”
• “Not supported” (invalid data type)
• “Not connected”
• “Pipe not found”
Comments
An L2CAP connection must already be established with the device. The
pipe specified must already be set up in the Data Transfer Manager. The
pipe should not be open when L2CAPSendDataFromPipe is called.
Example
L2CAPSendDataFromPipe(0x0040, "Pipe1");
L2CAPWaitForConnection()
L2CAPWaitForConnection(Timeout)
Parameter Meaning Default Value Comments
ChannelID L2CAP Chan-
nelID to send
data to
PipeName Name of the
transmit data
pipe to get
data to send
This pipe must exist.
Parameter Meaning Default Value Comments
Timeout Time in ms to
wait for an
incoming
L2CAP con-
nection
0 (Infinite
wait)
Use 0 as the timeout value to wait infinitely.