User's Guide

Table 4-14: Mechanical Condition (continued)
Axis Severity Upper LImit Lower Limit Units Remarks
Mechanical
Condition
Advise 10 0 None Mechanical
Condition
Advise
Table 4-15: Lubrication Condition
Axis Severity Upper Limit Lower Limit Umits Remarks
Lubrication
Condition
Saturated 1000 0 None
Lubrication
Condition
Sensor 1000 0 None Lubrication
Condition Out
of Range
Lubrication
Condition
Range 100 0 None
Lubrication
Condition
Fail 70 0 None Lubrication
Condition
Failure
Lubrication
Condition
Maint 40 0 None Lubrication
Condition
Maintenance
Lubrication
Condition
Advise 10 0 None Lubrication
Condition
Advise
4.6 Cleaning the device
Use a soft towel or paper towel to wipe any excess grime.
If necessary, use a mild detergent similar to dish soap.
Do not use solvents to clean the device.
Operation User Guide
July 2020 MHM-97927-PBF
52 MHM-97927-PBF, DRAFT