User Manual

C-2 Technical Specifications
UltraSpec 8215/8225 Laser Alignment Fixtures Specifications (continued)
Specification Description
Humidity 10 to 95%, non-condensing
Power management Auto “sleep” and “power down” modes
Battery Nickel cadmium
RF Operating Frequency 916.5 MHz
RF Operating Range 0 - 50 ft (0 - 15 m), typical
Battery life 3 - 4 hours continuous operation – 8 hours typical
1
Battery charging station Fully automatic super fast smart charger
(auto-switching, 110-240 VAC, 50/60 Hz)
Battery charging time 15 minutes (zero to full charge)
Laser to analyzer
communication
Cableless RF and/or direct cable connection
Minimum separation Any positive separation (faces not touching)
Maximum separation 8215: 30 ft (9 m), 8225: 100 ft. (30.5 m)
Standard mounting
bracket
2
Carbon steel base – thickness 0.75 in (19 mm)
Minimum shaft diameter
with standard bracket
0.625 in (16mm)
Maximum shaft diameter
with standard bracket
2
26 in (660 mm) – requires chain extension for shaft
diameters above 8 in (200 mm)
Vertical clearance with
standard brackets
2
5.25 in (152 mm)
Calibration Calibration to NIST traceable standards
Weight of total system 33 lbs (15 kg) – includes laser heads, brackets, analyzer
and accessories
1
Based on 25% laser operation, 25% sleep mode, and 50% analyzer only
2
Other brackets are available for special applications